Search AP Chemistry

Line Spectra and the Bohr Model

Practice: Start 10 random questions on this lesson · Pick your own set

On this page 3 sections
  1. 1. Continuous and line spectra
  2. 2. The Bohr model
  3. 3. Calculating the energy levels

1. Continuous and line spectra

Pass light through a prism and it spreads out into its wavelengths, a spectrum.

  • A continuous spectrum contains every wavelength, like a rainbow from sunlight or a light bulb.
  • A line spectrum contains only a few specific wavelengths, which show up as separate bright lines.

An emission spectrum is the light given off by gas atoms that have been excited (for example by electricity in a neon sign). Every element’s emission spectrum is a line spectrum, and each element’s pattern of lines is unique, so the spectrum works like a fingerprint for the element.

2. The Bohr model

Bohr explained hydrogen’s line spectrum with three ideas:

  1. The electron can only move in certain circular orbits, each with a fixed energy. The orbits are numbered n=1,2,3,…n = 1, 2, 3, \ldots
  2. While it stays in one allowed orbit, the electron does not give off energy.
  3. The electron can jump from one orbit to another. When it does, it absorbs or emits exactly one photon whose energy equals the energy difference between the two levels.
  • Ground state: n=1n = 1, the lowest energy and the most stable state.
  • Excited state: n=2n = 2 or higher, with more energy and less stability.

Since only certain energy differences exist, only certain photon energies, and therefore only certain wavelengths, can come out. That’s why hydrogen gives a line spectrum rather than a continuous one.

What was wrong with it

  • It only works for hydrogen and other one-electron species such as HeX+\ce{He+} and LiX2+\ce{Li^2+}.
  • Electrons do not really travel in fixed circular paths. The modern picture (next lesson) uses orbitals instead.

What we kept

  • Electrons exist only in certain energy levels.
  • Energy is absorbed or emitted in fixed amounts when an electron changes levels.

3. Calculating the energy levels

The energy of the electron in level nn of a hydrogen atom is

En=−2.18×10−18 J(1n2)E_n = -2.18 \times 10^{-18}\ \text{J}\left(\frac{1}{n^2}\right)
  • Every level is negative, because the electron is held by the nucleus. Zero energy means the electron has been pulled all the way off (n=∞n = \infty).
  • As nn gets larger, EnE_n gets less negative (higher in energy), and the levels crowd closer together.

The energy change for a jump from an initial level nin_i to a final level nfn_f is

ΔE=−2.18×10−18 J(1nf2−1ni2)\Delta E = -2.18 \times 10^{-18}\ \text{J}\left(\frac{1}{n_f^2} - \frac{1}{n_i^2}\right)
JumpLevelsSign of ΔE\Delta EPhoton
Down (for example n=3→2n = 3 \to 2)nfn_f smaller than nin_inegativeemitted
Up (for example n=1→3n = 1 \to 3)nfn_f larger than nin_ipositiveabsorbed

Then use the size of ΔE\Delta E as the photon’s energy in E=hc/λE = hc/\lambda. A wavelength is never negative.

Worked example: emission from n = 6 to n = 2
ΔE=−2.18×10−18 J(122−162)=−2.18×10−18(0.2222)=−4.84×10−19 J\Delta E = -2.18 \times 10^{-18}\ \text{J}\left(\frac{1}{2^2} - \frac{1}{6^2}\right) = -2.18 \times 10^{-18}(0.2222) = -4.84 \times 10^{-19}\ \text{J}

ΔE\Delta E is negative, so a photon is emitted. Its wavelength:

λ=hc∣ΔE∣=(6.626×10−34 J⋅s)(2.998×108 m/s)4.84×10−19 J=4.10×10−7 m=410 nm\lambda = \frac{hc}{|\Delta E|} = \frac{(6.626 \times 10^{-34}\ \text{J·s})(2.998 \times 10^{8}\ \text{m/s})}{4.84 \times 10^{-19}\ \text{J}} = 4.10 \times 10^{-7}\ \text{m} = 410\ \text{nm}

410 nm is violet, in the visible range. Every hydrogen line that ends at n=2n = 2 is visible or near-UV.

Worked example: absorption from n = 1 to n = 3
ΔE=−2.18×10−18(132−112)=−2.18×10−18(−0.8889)=+1.94×10−18 J\Delta E = -2.18 \times 10^{-18}\left(\frac{1}{3^2} - \frac{1}{1^2}\right) = -2.18 \times 10^{-18}(-0.8889) = +1.94 \times 10^{-18}\ \text{J}

Positive, so the photon is absorbed. λ=hc/ΔE=1.03×10−7 m=103 nm\lambda = hc/\Delta E = 1.03 \times 10^{-7}\ \text{m} = 103\ \text{nm}, in the ultraviolet.

Worked example: work backward to the starting level

A hydrogen line at 434 nm ends in n=2n = 2. Which level did the electron start in?

Photon energy: E=hc/λ=(6.626×10−34)(2.998×108)/(434×10−9)=4.58×10−19E = hc/\lambda = (6.626 \times 10^{-34})(2.998 \times 10^{8}) / (434 \times 10^{-9}) = 4.58 \times 10^{-19} J. The electron dropped, so ΔE=−4.58×10−19\Delta E = -4.58 \times 10^{-19} J:

−4.58×10−19=−2.18×10−18(14−1ni2)⇒14−1ni2=0.210⇒1ni2=0.040⇒ni=5-4.58 \times 10^{-19} = -2.18 \times 10^{-18}\left(\frac{1}{4} - \frac{1}{n_i^2}\right) \quad\Rightarrow\quad \frac{1}{4} - \frac{1}{n_i^2} = 0.210 \quad\Rightarrow\quad \frac{1}{n_i^2} = 0.040 \quad\Rightarrow\quad n_i = 5

Which jump gives the most energy?

The levels are farthest apart near n=1n = 1, so:

  • Any drop to n=1n = 1 releases more energy (shorter wavelength) than any drop that ends at n=2n = 2 or higher.
  • Between two drops, the bigger energy gap gives the higher frequency and shorter wavelength photon.